Cable gland EMC IP68 "SKINTOP" UL-approveled

Produced of nickel-plated brass.
Supply with sealing (CR). Profil thread with high torque guarantees tight and permanent fit of the cap nut (viberation-safe). UL-approveled.

Mounting:

Standard:
Step 1 - Strip back the outer sheath and screen.
Step 2 - Make a round cut in the outer sheath approx. 15 mm, but do not remove the sheath.
Step 3 - Guide the cable through the cable gland. Pull off the outer sheath. Pull back the cable 
             until the connection is made between the cable screen and contact spring. Turn 
             shut... and it is ready for use. 

With thin wires without an inner sheath:
Step 1 - Strip back the outer sheath.
Step 2 - Pull back the screen braid approx. 15 - 20 mm over the outer sheath.
Step 3 - Pull back the cable until the connection is made between the cable screen and contact
             spring. Turn shut... and it is ready for use. 

When routing the cable screen to another connection:
Step 1 - Expose the screen braid approx. 10 mm.
Step 2 - Pull back the cable until the connection is made between the cable screen and contact
             spring. Turn shut... and it is ready for use.